Cooling pad

Brown	Green	Black

Cooling Pad, or called wet pad, made of hydroscopicity kraft paper, is mainly used for the cooling system, humidification system and filter system. Mainly through the surrounding water evaporation cooling air, water vapor, regulating the air humidity, water vapor adsorption of dust smoke particles in the air to adjust the temperature, air humidity, air purification. Widely used in greenhouse horticulture cooling ventilation. Can effectively improve the high temperature hot air to the adverse effects of flower planting crops.

Good raw materials + rigorous process + elaborate + sincere service, is our great company always adhere to the "quality first" as the core to participate in market competition weight. GLITTER high-end wet curtain, compared to the domestic market the general quality of the wet curtain has the advantages of high evaporation efficiency, corrosion resistance, mildew resistant, long life characteristics. Select the GLITTER high-end damp curtain ventilator cooling ventilation system, is to choose the health, environmental protection, high efficiency and energy saving cooling and ventilation of a good helper.

Negative pressure fan

High quality negative pressure fan

  1)   Stainless steel fan blade, galvanized sheet frame, no deforming, no broken, attractive and durable.

  2)   Adopted CAD/CAM technology, high overall pressure, large air flow, low noise, stable operation, long service life.

  3)   With the motor rotating, shutters open and close automatically, thus preventing dust and moisture. It's best choice for ventilation in greenhouses and plants.

  4)   The protective net is single-sided, that is one side is protective net and the other is shutter.

  5)   The shutter’s support bar is plastic and the linkage is galvanized sheet.. 

Chrysanthemum high-end fan

Cooling system

Cooling system	High strength aluminum alloy frame	7090The high-end wet curtain

 Leveraging the principle of heat absorption though evaporation and exhaust fan.Glitter Pad-Fan Cooling Systerm proves to eliminate waste gas reduce the temperature ,thus environment and keeping cool and favourite air .“Pad-Fan Cooling Systerm”is the best economiical and effective option for cooling in the summer.

Glitter Pad-Fan is mainly composed of water pad wall and exhaust fan.

Water pad wall.Consists of aluminum alloy frame ,cooling pad ,inner components of the frame.

Aluminum alloy framework is used for fixing the cooling pad and ensuring the water cycle of the pad surface.It is made through the special aluminum alloy mould.It boasts a few properties. Such as easy installation,high strength,corrosion resistance ,compact structure .No leaking and so on.

Glitter Cooling Pad is the core of the cooling system .It is high spreading speed .Long efficiency,safe and no pollution.Due to the environment ,energy-saving and economical properties,it is a good choice among the cooling products.

Inner components of the frame. : the use of UPVC pipe fittings, high quality of high strength, good cold resistance, ensure that the water in the wet curtain surface circulation use.

Installation design

1,The wet curtain arrangement should try to reduce the ventilation to ensure indoor ventilation even dead.

2, The design of the wet curtain system should according to the site of summer light and wind consider installing position.

3,The wet curtain adopts embedded type installation, smooth opening around surface treatment and on eaves reserved space for installation.

4, The wet curtain adopts plug-in installation required civil party shall be prefabricated fixings.

5, The wet curtain paper only lateral assembly ,in no case shall avoid impeding the flow of vertical assembly.

6,When the wet curtain with the fan suction  is used ,space ventilation window and other openingsare airtight.

7, The wet curtain with fan positive pressure when in use, the need for a separate design installation scheme according to the construction drawings and use requirements.

8, Water supply is generally appropriate to increase the wet curtain in foundation design of the water supply volume of  drying, high temperature area..

The system use and maintenance

1,The reservoir shall be stamped with the sun and dust, conditional when wet curtain should also do the appropriate shading.

2, When the temperature is below 5 degrees, do not use wet curtain system, avoid impeding airflow, freezing water pipe.

3,When the wet curtain top seal, do not allow the operation of wet curtain system, do not use wet curtain long time should be whole sealing barrier.

4, Befor turning off the water system, the exhaust fan must remain rotating more than 30 minutes till the cooling pad absolutely dry.

5, It should be regularly (weekly) cleaning tank, ensure the cycle water PH keep 6~9and conductivity less than 1000 micromhos.

6, The wet curtain bottom can not have long-term immersion in water in case the algas breeding

 7, When the wet curtain surface algae breeding can put 3 - 5ppm to the pool chlorine or bromine, continuous treatment concentration was 1ppm.

8, The wet curtain operation must ensure the water supply pipe the water evenly, the filter needs cleaning regularly (weekly).

The other explanation

1, The wet curtain paper and wet curtain frame should generally be assembled at the project site, avoid transportation bump.

2, When the size of houses for civil construction error opening party beyond the design error wet curtain scheme, can be fine tuned in assembly.

3, Wet curtain cooling effect  depends on  the performance of the fan , Confined space and Outdoor air humidity.

4,The general should provide the wet curtain system of water pump, electric wire, power distribution boxes and other equipment .

5, the water supply quantity to adjust through the pump selection or valves, visual effect is ideal water for the whole of the wet curtain without the drenched dry streaks, also can see the thin water flowing down along the ripple.

6, Before transported to the construction site for installation, the wet curtain paper shall  kept attention to fire prevention. due to the flammable.

7, Wet curtain system extended change significantly with age.

Wet curtain system based on the correct installation and regular maintenance, the service life of the whole 5 years (artificial damage, transport damage, water quality reasons, other natural disasters except).

The engineering example